What Houzz contributors are saying:
6. Check the finishHere is how you can check the finish of a fitted wardrobe:Once the basic structure of the wardrobe is fixed at site, cross check the dimensions of the wardrobe and the position of the internal shelves with the measured drawing of the wardrobe design.All the fitted wardrobe doors with hinges should be at the same level and not one higher than the other.Once the wardrobe is finished with laminate or veneer, make sure that there are no air bubbles or waves created while applying the laminate, veneer or spray paint.There should be no extra holes in the shutters of the wardrobes that were formed due to wrong drilling by the carpenter – they should be immediately rectified. Additionally, there should be no projecting nails or sharp edges on the wardrobe, or rusted hinges.The final finishing should be done with polish or inner laminate and all the handles should be fixed.Once the wardrobe design is complete, check that the hinged doors of the wardrobe open smoothly or the sliding shutters move smoothly. Match the final look of the wardrobe with the proposed visuals.