Are Upholstered Walls a New Level of Luxury?
Upholstery can envelop an entire room, a framed panel or a single wall. See some design options and know what to expect
Karen Egly-Thompson
12 August 2017
Houzz Contributor
There’s something extraordinary about a room with upholstered walls – and it’s not just the visual stimulation. When you walk in, you can immediately notice the difference in sound, too, or rather lack of it. Footsteps don’t resonate, speech is quieted and that hollow echo that sometimes fills a room is absent, resulting in an intimate, relaxed experience.
Wall upholstery evolved from medieval times when hung tapestries helped keep drafts at bay. Fixed wall upholstery was introduced in the 17th century when opulent fabrics became more readily available.
While upholstered walls help with insulation, today they’re primarily used for aesthetics and acoustics, either by enhancing sound within a room or muffling unwanted outside noise. To be clear, though, upholstered walls aren’t your everyday, run-of-the-mill sort of wall treatment. They’re something quite special.
If you’re considering upholstery to wrap an entire room, adorn a single wall or cover a simple niche, there are a few things you’ll want to consider in terms of cost, installation and more.
Browse through images of wall upholstery
While upholstered walls help with insulation, today they’re primarily used for aesthetics and acoustics, either by enhancing sound within a room or muffling unwanted outside noise. To be clear, though, upholstered walls aren’t your everyday, run-of-the-mill sort of wall treatment. They’re something quite special.
If you’re considering upholstery to wrap an entire room, adorn a single wall or cover a simple niche, there are a few things you’ll want to consider in terms of cost, installation and more.
Browse through images of wall upholstery
Scope of project:
Upholstering an entire room
In this bedroom design, the entire wall surface is devoted to padded upholstery. Instead of a continuous, smooth installation, there is repetition of form with a panelled look. The effect is striking. Reflected light subtly drawn across the fabric enhances the slight pillowing between the panels.
This type of installation requires a solid, textural fabric. A pattern, in addition to being overwhelming in such a large installation, would visually suppress the geometry of the panels.
Upholstering an entire room
In this bedroom design, the entire wall surface is devoted to padded upholstery. Instead of a continuous, smooth installation, there is repetition of form with a panelled look. The effect is striking. Reflected light subtly drawn across the fabric enhances the slight pillowing between the panels.
This type of installation requires a solid, textural fabric. A pattern, in addition to being overwhelming in such a large installation, would visually suppress the geometry of the panels.
All four walls of this bedroom are upholstered in a fabric with a medium-scale print. The higher contrast (black and white) of this fabric makes it perfect for enveloping a smaller space.
If you’re considering a full-wall installation, be extra cautious about leaving a slight gap between furniture pieces, such as beds and nightstands, and the fabric wall surface, so as not to damage the fabric. Also, be careful when vacuuming, especially if your baseboard trim is shorter than your vacuum head. And be especially mindful when using candles.
If you’re considering a full-wall installation, be extra cautious about leaving a slight gap between furniture pieces, such as beds and nightstands, and the fabric wall surface, so as not to damage the fabric. Also, be careful when vacuuming, especially if your baseboard trim is shorter than your vacuum head. And be especially mindful when using candles.
This round theatre room is entirely upholstered to help absorb the noise from the media components.
Upholstering a partial wall
Because upholstered walls are costlier than other wall treatments (see below for info on cost), many installations are done on just part of a wall, traditionally the upper half. Upholstered sections are framed by architectural trim. This dining room has a pretty floral fabric edged by a chair rail and crown moulding.
Because upholstered walls are costlier than other wall treatments (see below for info on cost), many installations are done on just part of a wall, traditionally the upper half. Upholstered sections are framed by architectural trim. This dining room has a pretty floral fabric edged by a chair rail and crown moulding.
A dedicated bed zone can be created by upholstering a portion of the wall that is wide enough to encompass the bed and nightstands but does not engulf the entire wall. In this example a contrasting white trim sets off the upholstered section from the surrounding wall surface.
Upholstering a single wall or an inset niche
Many upholstered wall installations are done on an entire single feature wall instead of the whole room. Reasons vary from cost to aesthetics – too much fabric can sometimes be overpowering.
In the absence of any architectural wood framework, this approach creates a clean, sleek look.
Many upholstered wall installations are done on an entire single feature wall instead of the whole room. Reasons vary from cost to aesthetics – too much fabric can sometimes be overpowering.
In the absence of any architectural wood framework, this approach creates a clean, sleek look.
Design considerations:
Fabric type
For a full or partial wall installation that isn’t tufted, a light-to-medium-weight fabric – such as silk, shown here, or cotton or linen – will work well. A heavy fabric will likely pull downward and droop. Silks can be backed for additional stability.
Heavy fabrics, such as velvets, are best used in applications where they are routinely anchored, such as a tufted installation.
Depending on where you live, local ordinances may require flame-retardant fabrics and batting or foam, so it’s best to check first.
Fabric type
For a full or partial wall installation that isn’t tufted, a light-to-medium-weight fabric – such as silk, shown here, or cotton or linen – will work well. A heavy fabric will likely pull downward and droop. Silks can be backed for additional stability.
Heavy fabrics, such as velvets, are best used in applications where they are routinely anchored, such as a tufted installation.
Depending on where you live, local ordinances may require flame-retardant fabrics and batting or foam, so it’s best to check first.
Pattern matching
Just like with wallpaper and furniture upholstery, the larger the pattern repeat, the greater the yardage requirement. If your heart is set on a patterned fabric, be prepared to spend more than for a solid fabric.
A good professional installer will match the pattern on the wall and corners so the fabric turns with the continuity of the pattern intact. The beautiful floral fabric installation shown here illustrates this point perfectly.
Just like with wallpaper and furniture upholstery, the larger the pattern repeat, the greater the yardage requirement. If your heart is set on a patterned fabric, be prepared to spend more than for a solid fabric.
A good professional installer will match the pattern on the wall and corners so the fabric turns with the continuity of the pattern intact. The beautiful floral fabric installation shown here illustrates this point perfectly.
Trim or no trim?
Depending on how your wall upholstery will be installed, you may have unsightly edges that need to be covered by a trim, such as the braid shown here. Another option is a self-welt made of the same fabric or a tape trim. A trim will add additional expense to the project.
While some people like the look of trim, others do not. Some installation methods incorporate a system that eliminates the need for any edge treatment (see the section on prefabricated frame systems below). It’s best to figure out what you like and your expectations beforehand.
Depending on how your wall upholstery will be installed, you may have unsightly edges that need to be covered by a trim, such as the braid shown here. Another option is a self-welt made of the same fabric or a tape trim. A trim will add additional expense to the project.
While some people like the look of trim, others do not. Some installation methods incorporate a system that eliminates the need for any edge treatment (see the section on prefabricated frame systems below). It’s best to figure out what you like and your expectations beforehand.
Hanging artwork
Do you really want to hammer a hole through your upholstered wall to hang a picture?
If you have the space, consider adding a picture rail on which to hang artwork before the project starts. The rail shown here was painted green to blend in with the green tone-on-tone damask walls.
If you can’t spring for a picture rail or don’t have room, choose your art pieces and hanging locations thoughtfully. Unlike with paint, there’s no patching up a hole in fabric.
Do you really want to hammer a hole through your upholstered wall to hang a picture?
If you have the space, consider adding a picture rail on which to hang artwork before the project starts. The rail shown here was painted green to blend in with the green tone-on-tone damask walls.
If you can’t spring for a picture rail or don’t have room, choose your art pieces and hanging locations thoughtfully. Unlike with paint, there’s no patching up a hole in fabric.
Methods of upholstery installation:
Upholstered panels applied to wall
Designer Stacy Thompson of Compass Design designed the two upholstered wall sections shown here to double as a backrest for a couple of chaise longues.
She says it was a tricky installation because of the angled corner. She fabricated boards to attach the foam, batting and fabric to, then tufted the fabric. Screws attach the panels to the wall and are hidden behind the buttons in the tufting. To finish the raw edge, she used welting in the same fabric and glued it all the way around. Thomson says because of the complex installation, she would recommend hiring a professional for a project like this.
Good for you if …
Upholstered panels applied to wall
Designer Stacy Thompson of Compass Design designed the two upholstered wall sections shown here to double as a backrest for a couple of chaise longues.
She says it was a tricky installation because of the angled corner. She fabricated boards to attach the foam, batting and fabric to, then tufted the fabric. Screws attach the panels to the wall and are hidden behind the buttons in the tufting. To finish the raw edge, she used welting in the same fabric and glued it all the way around. Thomson says because of the complex installation, she would recommend hiring a professional for a project like this.
Good for you if …
- You’re upholstering only a portion of a wall or a niche in a simple shape.
- Your upholstery design is composed of sections butted together.
Prefabricated frame systems
Different installers use different systems. Veronique Thoman of V.E. Thoman says her company’s method uses a ¼-inch-thick clean-edge system (CES) frame that is anchored to the perimeter of the wall and around any trim, like on doors and windows. The frame tightly stretches the batting and fabric across the wall and holds it in place. In the image here, Eric Thoman is installing a light yellow fabric over a fireplace mantel.
Different installers use different systems. Veronique Thoman of V.E. Thoman says her company’s method uses a ¼-inch-thick clean-edge system (CES) frame that is anchored to the perimeter of the wall and around any trim, like on doors and windows. The frame tightly stretches the batting and fabric across the wall and holds it in place. In the image here, Eric Thoman is installing a light yellow fabric over a fireplace mantel.
The primary advantage of this system is that it neatly finishes the edge of the fabric so there are no raw fabric edges or unsightly folds. It eliminates the need for any decorative edge trim.
Here is a detail shot of the completed installation introduced in the previous image. The wall upholstery is level and neat and doesn’t pucker at adjacent woodwork.
Good for you if …
Here is a detail shot of the completed installation introduced in the previous image. The wall upholstery is level and neat and doesn’t pucker at adjacent woodwork.
Good for you if …
- You don’t want to use a decorative edge trim.
- You have complicated moulding profiles.
- You’re upholstering an entire room, a single wall or an inset panel.
Constructed grid system
If diamonds make your heart race, then this approach may be right for you.
Similar to a tufted wall, this look has volume. The pillowed effect is created by tying down the fabric by a network of gold cord and rosettes. It creates a rich, luxurious presence – with an elegant nod to the past.
Designer Hilary Unger of Perianth Interior Design says this theatrical bedroom wall was constructed by first applying wood strips on the wall. Foam padding was then cut into each diamond, with just enough space between the foam and slats to accommodate the gold cord that would be applied later. The whole wall was then overlaid with a layer of Dacron batting. Lastly, the velvet was upholstered to the wall. The underlying foam diamonds telegraphed through to reveal the outline of the foam diamonds to guide where the gold cord and rosettes were to be anchored. The result is dramatic.
Good for you if …
Cost
The cost of upholstered walls can vary greatly; it’s largely dependent upon the cost of the fabric, the complexity of the project and the location.
Unger says the cost for her project shown here, completed by Distinctive Window Treatments Plus, ran about ₹5,000 ($90) per square foot, including the fabric, related materials and labor.
V.E. Thoman says an average full-room installation starts around ₹28,0000 ($4,500) and includes the CES frame, padding and labor. The fabric is additional and supplied by the homeowner or designer.
If diamonds make your heart race, then this approach may be right for you.
Similar to a tufted wall, this look has volume. The pillowed effect is created by tying down the fabric by a network of gold cord and rosettes. It creates a rich, luxurious presence – with an elegant nod to the past.
Designer Hilary Unger of Perianth Interior Design says this theatrical bedroom wall was constructed by first applying wood strips on the wall. Foam padding was then cut into each diamond, with just enough space between the foam and slats to accommodate the gold cord that would be applied later. The whole wall was then overlaid with a layer of Dacron batting. Lastly, the velvet was upholstered to the wall. The underlying foam diamonds telegraphed through to reveal the outline of the foam diamonds to guide where the gold cord and rosettes were to be anchored. The result is dramatic.
Good for you if …
- You want to create a grid pattern with an applied trim. Diamonds or squares are superb shapes for this approach.
- You’re pursuing a full-wall or partial-wall installation.
Cost
The cost of upholstered walls can vary greatly; it’s largely dependent upon the cost of the fabric, the complexity of the project and the location.
Unger says the cost for her project shown here, completed by Distinctive Window Treatments Plus, ran about ₹5,000 ($90) per square foot, including the fabric, related materials and labor.
V.E. Thoman says an average full-room installation starts around ₹28,0000 ($4,500) and includes the CES frame, padding and labor. The fabric is additional and supplied by the homeowner or designer.
Maintenance
Dust is enemy No. 1 for upholstered walls. It sits on the face of the fabric and captures humidity and holds it against the fibres, accelerating deterioration. Lightly vacuuming the walls with a soft suction attachment is all you need to do for routine maintenance. Specialised wall upholstery cleaning companies can clean the walls more thoroughly.
Wondering how to maintain your soft furnishings?
Read more:
Soft Furnishing Maintenance 101
Tell us:
Have you used wall upholstery in your home? Share images and tell us how you chose a particular design in the Comments below.
Dust is enemy No. 1 for upholstered walls. It sits on the face of the fabric and captures humidity and holds it against the fibres, accelerating deterioration. Lightly vacuuming the walls with a soft suction attachment is all you need to do for routine maintenance. Specialised wall upholstery cleaning companies can clean the walls more thoroughly.
Wondering how to maintain your soft furnishings?
Read more:
Soft Furnishing Maintenance 101
Tell us:
Have you used wall upholstery in your home? Share images and tell us how you chose a particular design in the Comments below.
Related Stories
Decorating Ideas
35 Serene Puja Room Designs
Take a leaf out of these elegantly designed, beautiful prayer rooms on Houzz
Full Story
Decorating Guides
Turn One Room Into Two With These Genius Ideas
Carve out an extra room within your home with these fab room-splitting tips and tricks
Full Story
Small Spaces
7 Stylish Ways to Dry Your Laundry In a Small Apartment
Has your drying rack become a perpetual eyesore in your home? These dapper laundry drying solutions have you covered
Full Story
Decorating Guides
7 Types of Glass That Allow in Light & Privacy
These glass products and treatments will increase privacy without losing natural light
Full Story
Most Popular
Which False Ceiling Material is Better: Gypsum or POP?
Here is all you need to know about the difference between gypsum and POP before you commit to a ceiling
Full Story
More Room Guides
No Space for a Walk-In Wardrobe? Think Again
By Laura Wheat
Think again with these tips for maxing your clothing capacity and adding a dressing room feel
Full Story
Dining Rooms
12 Breakfast Nooks Cool Enough for a Dinner Party
By Susan Redman
Forget eating side-by-side at a breakfast bar or supping at a long dinner table – the cosy kitchen nook is a far more hip way to dine
Full Story
Decorating Ideas
Indoor Plants You Just Can't Kill
These greens can up your decor game and refresh the indoor air but do not demand much in return
Full Story
Decorating Ideas
10 Must-Have Elements in an Inspiring Home Gym
Make your workout zone a space that inspires you to get your sweat on
Full Story
Decorating Guides
False Ceiling: Yes or No?
If you are in two minds about installing a false ceiling, this should help you make up your mind
Full Story
I would to find someone who can upholster a wall in my area. Blairsville Ga. I need it for color but also for sound absorption.
I can have a fabric of your choice paperbacked for you so that it can be hung like wallpaper. Then a beautiful border or trim around the edges and you have walls with texture or pattern, depth of color and sound absorption. A beautiful retreat designed to bring you great joy.
Thank you for featuring my design! Go to http://www.caseydesignplan.com for more like it!