what kind of handle should I give to this draer

Hello Kanika, Sorry to hear your experiences. There are many a possible fixes to this issue . Use the ones based on your patience level. These are not DIY stuff and you may need help to do it. Please handle the chemicals/acid with extreme care. Steps: You may not need all ;) 1- Start with pressure washing with water at least twice 2- Dry Soda/sand blasting will remove most of the putty 3- Diluted hydrochloric acid wash will take away any remnants. It will remove the remaining flakes and also etch the polish marks. 4- Finish with a soda wash to remove any acid + Pressure clean once again. Alternatively, there are a few old school tricks which work great to hide these errors. 1. Make a thick mixture of cement /water/binder and touch up on the white putty marks. Let them dry, and proceed with smaller ones. 2. And If you want a similar finish, a paint like consistency of the above cement and water mixture can be applied on the wall using a paint roller make sure to do it one go as cement does change color in each batch. You may add colors and lime to add some character. Caution: Before proceeding with any of the above, test it on small patches. Be extremely cautious with acid and blasting dust. Thanks, Amit CORNERSTONE DESIGNS Bangalore

Ur query appears too much to answer: FIRST comes flooring , keep it white or little bit nearby Next is front display, for Attraction - Usually Dining table and Sofa with Decor. Arrange fast moving products at the lower floor, you have to research this. Sofas with small closet's like bar counter, with partition s in between usually. As customer moves in n in Sizes shall increase. Upper floor U can go for Dining table, wardrobes, Few designer decor . Anyways don't forget Lighting arrangement s . All the best!!

Hello there, whatever suggestions you want won't come free. It is recommended to hire a professional design consultant to continue with your project. Regards, Aurum Ideas and Spaces Bhubaneswar +91-9078942136