So for this to work, you need to go back through my question and make sure you have answered all of them the best you can. Is the electrical outlet for the counter space going to be right next to the switch, or is it that blurred spot that I see in the picture, . If your walls are Travertine marble, and there are not already electrical boxes in the exact location the lights go, we are going to have a hard time. If a 30" vanity goes in the corner, and you leave 5" on each side for the lights, that leaves a 20" mirror with one light jammed tight into the corner. So if we leave another inch on both sides, for clearance, that leaves 18" mirror. If you put a 3" frame around the mirror mirror, that only allows for 12" of actual mirror. I don't think that is enough mirror. Your bath is too narrow for a mirrored cabinet with built in lights unless it is recessed into th wall. The plumbing is probably in the way for that. Give me your thoughts on what I have just said, and then go back and answer all my questions. Then we can take it from there with a narrower down and focused search.

Make top open mirror shutter and inside partition. instead of glass use mirror mica better dueability

Can anyone suggest, if there are any issues with using PVC board in Bathroom....heard that the screws gets loosen down after sometime or they do not fast properly.

Hi, Greetings from Home Credence! Oval shaped mirror can be used here as it will also match the pedestal basin or there are many cabinets available in the market with mirror on front surface and storage space for brushes/toothpaste. So, both of your requirements of mirror and cabinet will get fulfil. For soap dispenser, you can keep it at 15" right from the center of angular cock or match the tiles joint whichever is appropriate at 39" height from FFL. You can also add towel rack on the opposite wall of shower. Thanks & Regards, HOME CREDENCE