With the curves in your couch seat, I'd prefer to see your stripe fabric in throw pillows and a solid used for the couch. I don't like how the stripe fabric cannot not line up from the seat to the banding on the curve, I'd use an aqua on the couch and the gold and stripe for the pillows.

Have you considered a mural? We make a durable, non-fading material that is seamless up to 5 metres wide on the short side (length can be over 100 metres!). Normally we install it on ceilings, so it is called 'stretch ceiling', but it works just as well on walls, and can be wide-format printed with any high resolution image. A narrow, nearly invisible frame of aluminum supports the material all around the perimeter. Our material also comes in translucent, which we can install with LED lighting behind. Here are some previous installations of ours. Please feel free to browse our profile and add anything that inspires you to your ideabooks! The material and framing is all fully recyclable.

Go for Asian Paint Re-painting Process Repainting is done when your home is already painted once. It is required when you need to decorate the house afresh or old painted walls are not in good condition. Step I – Prepare Wall for Painting 1. Scrap the old paint using sand paper to remove falkes, loose particles. 2. Fill the cracks, pores, damages using putty – wherever required. Please note – putty is not required in re-painting in general, however one of coat of it can be used if walls are damaged badly. Step II - Apply Primer 1. Apply one coat of primer to smoothen the surface. 2. Let is dry for few hours. Step III – Apply Paint/ Designer Walls. 1. Apply two coat of paint successively after drying the first coat. 2. Or Get your texture/stencil/design work done Please Note- Primer is a must for Designer Walls. Fresh Painting What is Fresh Painting and when it is required? In general we do Fresh Painting in newly constructed home, apartments. In Fresh painting walls are completely rough. Some times in old houses fresh painting is also needed when its wall condition is really bad, damaged or outer layer of old paint is completely broken. Step I – Apply Primer and Putty. Primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. So primer is always used in fresh painting. Putty is generally used for filling the minor cracks, wholes, damages to level the surface for painting. Putty is a generic term for a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. 1. Apply One Coat of Primer, let it dry for approx 2 hours. 2. Apply One Coat of Putty on Newly Constructed Wall as base. 3. Let it dry for some time let say approx. 3-4 hours. 4. Apply Second Coat of Putty and Let it dry again for few hours. 5. Use Sand Paper for smoothening or levelling of wall surface. 6. Apply Second Coat of Primer after drying the putty. Step II - Apply Paint 1. Get the requested products which need to be used, verify the color code, pour the paint in bucket and mix some amount of water. 2. Apply first coat of paint using roller and brush. 3. Let it dry for some hours and apply the second coat of Paint. 4. Final touchup if finishing is needed. Take care of all above process

I select these colours with the help of other houzzer and expert professional advice and discussion. I also got help from colour paint catalogue. Is it looking good or not? Is there any problem with these colours and their combination. Please guide me in this regard.