As hatetoshop mentioned , moving the bed to the gap between two window is would be right choice. as in current placement you have windows above your head which does not help for a view and looks odd. you could place double curtain rod or use existing curtain rods and add additional sheer /thin curtains for additional privacy during day as well as light. In future you can add two bedside tables as well and some bedside lamps. In India we are still not used to lower lighting (floor lamps, table lamps with warm day light bulbs) but trust me,it will add new dimension to your bedroom. Also some wall art. example a well framed big size ( 2ft * 3ft) art poster above bed (cheap way to add life (I wont use word "Class" (find it too much)) . Also in future you can think about having a pair of bed sheet (to sleep on ) and bed cover/spread (a good quality cotton one) to cover the mattress during day. And a dhurrie runner would be a good addition as well. All above wont cost too much and maybe little bit investment in quality material can be good as well as u don't have to change these often and can be a long term solution.

The wall is stunning and creative, but sadly, I have to agree with the consensus expressed on all your threads: this wood should have been bone dry, carefully checked over piece by piece for holes, insects, existing fungus etc., and probably treated and certainly well sealed before before being installed. At this point, I would cut my losses and take it down. Once the pieces are all down, it's possible that if you thoroughly scrub off all fungus with a bleach solution, then let them dry bone dry (preferably in a wood kiln or perhaps a DIY drying shed), then treat and coat, these pieces could be reinstalled. Even that depends on the conditions they'll see - if this wall is exposed to lots of steam or grease you'll be having new issues before long. Also, is the wall itself dry and solid? Any chance water is leaking or oozing from somewhere and adding to the issue? What species of wood is this? Some species are naturally more fungus resistant and appropriate for this than others. Long story short, I'd recommend finding a different way to cover the wall - with ceramic, galvanized metal, or with a really scrub-resistant paint.

The wood has to reach what's called Equilibrium Moisture Content (EMC), which is different for various areas of the country/world. I don't know about end grain slabs, which is what you have, but the rule of thumb for lumber air drying (vs. kiln drying) is 1 year for each inch of thickness. Moisture leaves the end grain faster than the side and/or edge of the boards, so in your case the drying time will probably be shorter. If it is not dried in a controlled environment your slabs are going to split radially, due to drying too fast.

I really liked the indirect lighting and the bar light fixture.