Thanks Pragati, it looked to me like some sort of high polished quartz stone and if this was the case there would be a way to hide these joints by filling them with an appropriate material and polish them thereafter. So I guess, the framing-idea with the LED-Strips which pollyannagal mentioned would be a good option. You could also tape some sort of accent-tape over the joints or even just LED-Strips to hide these ugly joints. Cheers Bertram

Laminated finish Merino Elevated wood high gloss and Silver MT combination Sink and Tap= Franke

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Here is a solution to this of u can’t find acrylic or laminate of the same colour the u can get it pained from Asian paints they have a huge variety of painting solutions with whatever shade u want. So what u can do is get the core material of plywood and put mdf on it to get a smoother and even surface and then ask Asian paints to get it painted for u I think it will we cheaper as well as u can get ur desired shade