I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Hello.Kamal, Thanks for letting us know that Spruce is also being used for external door/frames. Which part of india is this a practice ? I always under the impression that it is a soft wood which is not meant for external doors/frames and was more suitable for interiors. Thanks, Nitin CORNERSTONE DESIGNS Bangalore

hi the best material for bathroom doors is FRP. COMPLETELY WATERPROOF. For more premium segment ABS doors are good. ABS is highly engineered plastic doors with WPC frames. All materials used except the wood used in lock body is water proof. Both doors and frames come laminated . Pic :ABS door.

Hello there, When you have considered granites as window frames, it will definitely outperform than any other material as it is a natural stone. Second, the borders and frames need to be put up very carefully with a skilled stone worker only and please ensure the appropriate mortar mix before fixing. Third, mirror polish is needed for the frames as they look incredible when using with uPVC profiles. Fouth, pre-drill holes for hinges and security grills. Hope your project turns out good. Regards, Aurum Ideas and Spaces Bhubaneswar