I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Manpreet, Congratulations on your new home! You can go with BWP ply with laminates. You are right in your choice of matt and glossy laminates for base and wall cabinets respectively. Without knowing your tastes, I am taking a chance to suggest you 14541 for base and 21187 MR+ from merino catalog. It looks good. Thanks, Nitin CORNERSTONE DESIGNS Bangalore.

Dr Gautam, We usually avoid using MDF in kitchen due to its screw holding strength. We woul recommend BWP ply as the base material. However some finishes do require MDF/HDF to be used as a base. Titus is a decent brand but please ensure you get easy replacement few years down the line for regular maintenance. Thanks, Nitin Cornerstone Designs Bangalore.

looks like a laminate. could be digitally printed wallpaper or even printed acrylic sheet!