I do like the design. Quite a lot. It's modern and sophisticated. I really like the subtle detail of the base top being inset to create a reveal right under the sunmica top. I assume the width and length of the sunmica top is exactly the same as the base, it seems that way from the drawing. I like that too, it makes the reveal more purposeful. The short sides are best left plain as i think you planned. You don't show the short side so I'll assume the base connects at the top and bottom, and the field open. I like the antique polished gold for the base. I like it in concept, I don't know the room it will go in. You're very on track, so I'm sure that is the right finish for your space. For the top carving, again I like the deep brown polish. I think it adds more to the piece by having another finish. I'm curious about the overall height. What is it? Also, the table is large. Not huge, but large. I don't think you need to make it smaller, I just want to bring this to your attention so you make sure it will fit in your space properly. Finally, the mirror. Are you using a plain mirror? Smoked glass mirror or a mirror with a slight antiquing would be great.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

that is what i have added if you can see the pic above.. want some suggestions on partition that i can use between dining and sitting

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?