I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Hello Mr.Anand Joseph Hope this May help you out!!! 1. Single panel partition For small compact houses creating a large partition is not an ideal choice. Instead you should opt for a similar looking single panel fittings which will mark the separate areas without making the room look cramped. 2. Long room layout For those of you who have a long rectangular shaped room like this then opting for a similar layout is an ideal choice. The designer has used a single wall to incorporate the kitchen as well as the living space. Along with this he has also turned the island into a dining space. 3. Half wall partition If you do not want a completely open kitchen then this half wall partition is a great alternative. By creating a partition with glass and bricks you can achieve the privacy that you are looking for and yet will be able to eliminate the use of permanent walls within the room. 4. Connected dining table Another great way to combine the areas together is by connecting the dining table with your main Kitchen island. By doing so you can make the space multi functional. This will also make it easy for you to serve food as you do not have to walk from one room to the other. 5. Enclosed kitchen This enclosed kitchen layout can also be a great alternative while you are trying to combine different areas in one room. The kitchen has a service window which gives you enough space to pass on food making it easy for you to cater your guests. 6. Narrow kitchen If you want to give your dining and drawing room more space then the kitchen then opting for this narrow layout is the perfect choice. By using a single wall to install cabinets and appliances you can keep the rest of the room free for other purpose. 7. Spacious layout The best way to make a room looks spacious is by setting furniture in different corners. The Designer for this house has used one corner to create a living room whereas the opposite corner to incorporate a dining table. 8. Wooden partition If you have a large room that needs to be transformed then installing this wooden partition between your living and dining space is highly recommended. This type of wooden partition will give your home a beautiful and elegant touch. 9. Open layout If you have a small room that needs to be utilised then this open area layout is the best option. The designer has created a kitchen island which acts as a dining table and also a preparation area for your meals. Apart from this the L-shaped couch can also give you a maximised seating area. 10. Compact layout The designer of this house has opted for a open kitchen where all the counters are set in a U-shaped which gives you enough space in the middle. Along with this the dining table is also situated right in front of the kitchen so that it is easy to move around.

I feel partitions are not needed. You already have too much for the space. Adding a partition will shrink the space further. The simplistic solution, you do not wish to discard any furniture would be to paint all the walls in lighter pastles. And use some wall painting frames to highlight certain walls.