I like this tile as well. Very sleek and mod looking. I would consider running it vertically instead of the picture horizontal pattern. It might give the illusion of more height in the shower surround. The color is great. If you are worried about it being "too much," you could always see if they have the same tile in a different shade and mix the two or doing one wall in a contrasting (lighter) color. I personally like it as long as you have good lighting.

I'm a Certified installer for Trex decking. Trex Transcend is encapsulated board, with a finish that resists staining, scratches, mold and has a high definition wood grain surface. I don't know what you did to it or whoever worked on your house did something to it, but Transcend decking does not need staining or painting and the protective shell protects decking against fading. Trex Transcend and a few other Trex decking products like Trex Enhance, and Trex Select, they cannot be painted or stained. The only thing can be painted is Trex Transcend White Railings and you should only use light color paint. If you use dark colors, it will absorb heat and it will damage the surface and you can kiss your railings good bye. Also high quality fast drying primer should be used and you have to use Oil or Water based exterior paint and most importantly surface prep is the the key. When it comes to painting specialty surfaces like Trex Railings, hire a Pro to do the work. With that said, if you installed Trex yourself, you have to go to the store and have a Trex representative come out and check your deck. They will determine if loss of color fading was due because of negligence or not. If its a material defect, they will cover the material cost. If you had a Certified contractor do the work, they will cover material and labor. Call your contractor and he will get a Trex Rep to come out within a few days. Good luck

Tsilanko, I would always recommend professional installation where needed. But what I am doing here is suggesting that WHEN you are planning to build or renovate, to consider how your plans will affect you in 20 or 30 years time. Split levels are very hep when you are young. A kitchen 3 steps down at 30 is rarely a problem, but might be a hazard at 60, or, as Marjie1059 suggested, if you break a leg. ... All my parents' homes were terrible for old people. They were forced to move to a bungalow in extreme old sge because the location and design of their home was more suitable for an active young couple with a large family than for an elderly couple with stroke disabilities. I would not want to move again, so my present home has features built in that make ageing in place simpler. Mostly small changes, like grab rails, and lever handles on doors and faucets. A major disability suddenly suffered requires major changes if permanent. I did look at this because it came up in the discussion, but if you look at the heading, Planning for Disability, it means just that. Plan ahead so you don't have to make expensive changes later on. But thank you for your advice, yes, major changes are not in the DIY domain.

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?