So for this to work, you need to go back through my question and make sure you have answered all of them the best you can. Is the electrical outlet for the counter space going to be right next to the switch, or is it that blurred spot that I see in the picture, . If your walls are Travertine marble, and there are not already electrical boxes in the exact location the lights go, we are going to have a hard time. If a 30" vanity goes in the corner, and you leave 5" on each side for the lights, that leaves a 20" mirror with one light jammed tight into the corner. So if we leave another inch on both sides, for clearance, that leaves 18" mirror. If you put a 3" frame around the mirror mirror, that only allows for 12" of actual mirror. I don't think that is enough mirror. Your bath is too narrow for a mirrored cabinet with built in lights unless it is recessed into th wall. The plumbing is probably in the way for that. Give me your thoughts on what I have just said, and then go back and answer all my questions. Then we can take it from there with a narrower down and focused search.

Hello Jagriti, For internal walls , you may want to identify and fix the source of dampness to avoid recurrence. You may then treat the wall with 1 coat of Asian paints damp guard or Dr Fix it damp-proof solution and then with putty mix of same material followed with 2 coats of this paint again. Follow the instructions as given on respective products. Thanks, Nitin CORNERSTONE DESIGNS Bangalore.

Hello Sujeeta, Take care of the waves in the wall while preparing the base . The reason behind this is, when you finish the wall with the wall paper the waves in the wall is noticeable or the gap creates the bubbles in that particular area. Practically go for the pop putty or the gypsum sheet fixed for the perfect finish.

not really reason its not very good or eco-friendly material as far as bedroom is concerned