Raj - What you say is true that a lot of interior design's margin is in furniture. I will not sugar coat it. And many designers may seem to be more interested in that when you bring them in. But I have had several clients call me over the years saying they are building a new home and would like to consult primarily on layout. When you speak to someone is tell them you are not ready to order furnishings or window treatments, but that you would like a contract that focuses on layout, planning, and interior detailing (i.e. doors, trims, floors) - i.e. the bones of the house. What I would suggest is when you call for a designer, you be prepared to pay a good consultation fee. A good rule of thumb is that you can expect to pay between $3-$10 per square foot of your home depending on the area of your country and the expertise/experience of the designer. If you are not averse to paying this type of fee, and communicate to the designer that your interest is in getting the best solutions, not in purchasing furniture at this time, I'm sure you will be able to get the level of service you desire. If someone you talk to doesn't seem thrilled to provide this kind of service, move on to the next person. Don't rely on "fame" or how well known someone is. They may be well known for doing show houses or just because they've been in the field the longest in your area. Not because they're the right fit for you. You could also check the Houzz directory for good designers in your area. The difficulty is that there are often decorators whose expertise and focus is really just on furnishings not so much on construction - and they serve a purpose for their clients. But there are other designers who provide more of a wholistic approach and have more familiarity with building a new home. These are the people you should seek out. Houzz is a fantastic community - and as I said you may get good advice here but there's really no replacement for someone to work with you in person. Sorry for the super long post but I feel passionately about this and I think this advice will best suit your needs.

Hi Rasa, Nice to hear from you and I’m glad I was able to give you some inspiration for your kitchen tiles. I’ve included another image for you to look at that shows more of a farm house style kitchen with the coloured tiles. If you worried the coloured tiles might look too contemporary for your space, I would advise going for quite soft, muted colour tones to give you the same effect but in a more rustic style. You can see in the attached image how they have used a soft sheen, textured tile in neutral tones, with a subtle hint of colour to be in-keeping with that farmhouse feel. For your tile colours, you could pick up the off white tone of your cabinets with the grey in the granite, and a very soft hint of green or blue to add a little colour to achieve the same look for your kitchen. I have also added some paint swatches below you could use as reference for tile colours to help you visualise the combination. Off white: Greys: Blue or Green: Hopefully this answers your questions for you and I’d love to see some pictures when your project is finished. Good luck with the decorating. Paola Dulux Design Expert www.designer.duluxamazingspace.co.uk

Dear Pushpesh, Designing is a subjective and collaborative work and it relies on various aspects like Budget, lifestyle, context and more. Providing proper and complete information is the first step of a successful project. Interior Designing is demanding and takes a lot of effort as along with robust space organizations, it demands a lot of attention while using finishes, patterns, materials, colors, textures and many more. Also it might be a big expense as compare to Architecture. Your above post shows you are vary clear with what you want and looking a good quality work. I will advise you to consult a professional assistance as it will add value to your design and will also enhance the final result of what you are expecting. You can contact me for further more. Thanks and Regards Ar. Ravi Prakash 8882204074 ar.ravi2013@gmail.com

Hi, From your Question, I understand that you are looking to integrate a built-in DW and MW in an existing modular kitchen in your home or a new one you have ordered from a kitchen cabinet manufacturer. In either case, your first phone call should be to your kitchen supplier who fitted / will be fitting the kitchen cabinets. Here's WHY? The kitchen cabinet supplier will confirm the size of appliance required as per the kitchen design. They must have made suitable provisions in the cabinets to accommodate these equipments inside cabinets. The cabinets for DW and MW are different from the rest, since the DW sits directly on the floor while MW needs an escape vent at the back for hot air. 2. You need to confirm whether there exists 15 amp power points at appropriate places for each equipment. 3. For built-in DW, a water inlet and outlet at correct positions are required. The kitchen vendor and/or the built-in DW supplier will visit your home and do PDI to mark the exact location of electrical / plumbing points. It will be useful if the kitchen vendor and plumber / electrician are at hand during this PDI, so as to check and discuss relevant issues on the spot and give their confirmations ( or alternatives ) and close this essential issue to the satisfaction of all concerned. Usually, the actual spot is marked on the wall itself and a line drawing showing kitchen cabinets with exact electrical / plumbing positions marked clearly on it, are shared with relevant agencies to eliminate mistakes, if any. Any corrections reg electrical / plumbing will be expensive and time consuming once the cabinet and countertops are fitted. The appliances are typically installed at the end of the project, when all other works are done and almost all agencies ( read workers ) engaged in the premises have left. So, any mismatch between the initial discussion and actual execution comes to light too late in the day !! To avoid this scenario, ask the built-in equipment supplier to visit once more and verify if their requirements are met. Oftentimes, appliance cos. take refuge in such 'non-compliant' provisions and avoid delivering on committed guarantee / warranty, in case of issues at a later date. It's better to go through this cycle once initially, and get everything right in one go. It is also worth noting here that the positions of electrical / plumbing points vary with brands and models, so once you freeze the brand and model, it is advisable not to change the decision thereafter. However, if your kitchen cabinet maker is a pro and experienced, you may just leave it to him and sit back. A good company / professional will take care of all this. Most of the points mentioned above come with a steep learning curve and are not in any book. They don't teach this in any professional design / architecture course. Once all above is sorted....just check out prominent brands in your city / region. Some names that have stood the test of time are SIEMENS / HAFELE / KAFF / ELICA. All of them have a reasonably good service set up which will get top 'selection criteria' in my book. Also, most of them have enough machines out in the field and that means they are likely to have common spares etc with them, when needed down the years. It is a good idea to buy appliances from a single brand as that saves you the trouble of calling different companies for each appliance. Regarding specific model selection....most machines have all the basic features that are commonly used. A MW may have 58 ( so to speak ) pre settings that you may never use unless you are a Chef. Ask your wife and/or leave this to the family member who will spend most time in kitchen. MW with grill / convection features is a good choice and all above brands have them. Hope this answers your Question, and apologize for a loooong reply. But it's better to know relevant issues and decide. Thanks and good luck :)