I'm a Certified installer for Trex decking. Trex Transcend is encapsulated board, with a finish that resists staining, scratches, mold and has a high definition wood grain surface. I don't know what you did to it or whoever worked on your house did something to it, but Transcend decking does not need staining or painting and the protective shell protects decking against fading. Trex Transcend and a few other Trex decking products like Trex Enhance, and Trex Select, they cannot be painted or stained. The only thing can be painted is Trex Transcend White Railings and you should only use light color paint. If you use dark colors, it will absorb heat and it will damage the surface and you can kiss your railings good bye. Also high quality fast drying primer should be used and you have to use Oil or Water based exterior paint and most importantly surface prep is the the key. When it comes to painting specialty surfaces like Trex Railings, hire a Pro to do the work. With that said, if you installed Trex yourself, you have to go to the store and have a Trex representative come out and check your deck. They will determine if loss of color fading was due because of negligence or not. If its a material defect, they will cover the material cost. If you had a Certified contractor do the work, they will cover material and labor. Call your contractor and he will get a Trex Rep to come out within a few days. Good luck

Hello KK, White and Brick Red combination may also look good besides the above suggestion. Ultima Protek is better and more lasting paint. Make sure you follow the painting instructions it should last for 8-10 years. It requires approx 4-5 coats of different dilutions and drying time of 6 hours between coats and avoid rainy seasons for painting. All good painters are busy during diwali so better get it done before or after it. Thanks, Nitin Cornerstone Designs.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

You know it is because of people like you....who are begging for designs online....that we professionals like us are without any projects doing jobs and even unemployed sometimes... and you obviously would say it helpfullll...i really like the online beggers like you.....let me tell you....