So for this to work, you need to go back through my question and make sure you have answered all of them the best you can. Is the electrical outlet for the counter space going to be right next to the switch, or is it that blurred spot that I see in the picture, . If your walls are Travertine marble, and there are not already electrical boxes in the exact location the lights go, we are going to have a hard time. If a 30" vanity goes in the corner, and you leave 5" on each side for the lights, that leaves a 20" mirror with one light jammed tight into the corner. So if we leave another inch on both sides, for clearance, that leaves 18" mirror. If you put a 3" frame around the mirror mirror, that only allows for 12" of actual mirror. I don't think that is enough mirror. Your bath is too narrow for a mirrored cabinet with built in lights unless it is recessed into th wall. The plumbing is probably in the way for that. Give me your thoughts on what I have just said, and then go back and answer all my questions. Then we can take it from there with a narrower down and focused search.

What lovely manners you have! I hope some pros are able to help you.

Hi Sir, Since you are done Identifying your needs and limitations follow some referenced tips! Like thinking about three viable plans gives you greater flexibility if some elements are unworkable after talking to your designer/architect. They also help you clarify the mix of elements that are most important and the least to your family and your lifestyle. You also need to separate your interior design and completion of the home budget, which includes new fittings and furniture, garden treatments, etc., from the building budget. Finally, after working out a budget, determine if your expectations are realistic. If certain elements may make you go over budget, tweak and adjust your plans so they are viable. Once you have finalised your top 3 house plans, you should choose someone to make them a concrete floor plan to develop. if not? try these tips to communicate your vision - use software, Pin it, make mood boards and gather sample materials. Good Luck! - Layden Wangmo [senior design consultant] MAD DESIGN

Hello @Cornerstone Design Studio India No. I don't have any idea about FSI. I will try to learn more about it. Regarding the size of green belt, I have confirmed it from the patwari that Plot 1 has got 5 metre green belt on both sides. He told me that: All plots with 24 metre facing road are having 5 metre green belt whereas plots with 12 metre facing road are having 2.5 metre green belt. (It's 4 or 3.5 metre in case of 18 metre road, I don't remember exactly). About that bold line, I am sure that it is not representing width of green belt. (Check below image as that bold line is having same width for 12 metre facing plots). So what do you think now? Should I become that lucky guy to own plot 1? Check out whole map and there are hardly 3-4 corner plots which are having 24 metre wide road on both sides. (and there are just 2 plots having North East direction) whereas there are around 50-55 plots which are similar to Plot 2nd. About your query, It's Suncity Township - I (Sector 35, Rohtak). It's around 45 kilometres away from Delhi border. Would you please mind elaborating this point a little bit more - "For us function prevails over design anyday". If built up area is going to be same in both plots then how it affects functionality? Thanks a lot for your detailed input.