I think the marble naysayers have jumped on the bandwagon without really living with the stone. I have statuary in my bathrooms and love it. Most stains can be removed with a simple baking soda and water poultice. Acid etching is harder to deal with since it removes the polished surface, but its part of having a living stone in your home. If it becomes too bad, you can have it repolished. With a darker stone, you won't have as many issues as a white marble. In order to really know if you can live with it, I suggest you get a small sample of the stone and do some tests. Here is an example. http://www.dohiy.com/2013/04/21/marble-countertops-the-post-acid-test/ Please note that she used bleach and oxyclean to clean the stone after her test. Stay away from both since they can etch the stone just as much as an acidic food. Instead, clean with a ph neutral cleaner like isopropyl alcohol (rubbing alcohol), and for heavy stains, the baking soda poultice mentioned above. You have to remember that marble has been used for centuries as flooring, table tops, countertops, etc. throughout the world and most of these installations are still here and aren't stained and etched to the point that it has been ripped out and replaced. Just think about all of he luxury hotels in Europe and how many times they have been exposed to Hangover type guests without any damage.

Sophie, Patricia you are right cleaning the crystals would be a hell of a job. Hence I would like to look at designs like the other pic I attached which is I believe from the e.ion range of Falmec. As I have mentioned before this is a second chimney. The primary chimney hood is above my gas job in the kitchen countertop and is the main and daily area for cooking. This is the secondary area which I plan to use for some quick heating, occasional stir fry etc. The pendant chimneys that I have come across in brands like Elica and Falmec do not require ducting. The filter needs to be changed every 6 months or more. With my kind of usage I am assuming I would need to change it even later. What I am looking for is different brands which have pendant chimneys. Right now I am only aware of Elica and Falmec. I know Siemens and Bosch don't have it. Siemens has 2 models which are like a flat rectangular panel to be attached to the ceiling or false ceiling. But the cost is same as the Falmec chimney. My only respite may be the cylindrical Isola chimney models from Faber or even Hafele which are ip within budget.

Usually when you get side panels you automatically have space on the sides. If you have a full depth cabinet on the top, you automatically have space at the top and in most cases you will have leave at least 1 inch of extra room for the back of the refrigerator, so there is always air circulation since everything is enclosed. In the 70's they use to make a small recessed space behind like Fred said, today you don't have to do that, most Ref have flat backs, recessed wiring, not to mention the supply for ice-maker also comes in a flush mounting kits for the wall... so pretty much everything is recessed and only space you need is for air circulation and 1" is more then enough. In addition, if you make recessed area now and you push ref to far you will never get your doors open so doing all that is a waste of time, in addition most manufacturers starting to make 30" side panels.

Your choices don't flow well to me. The flooring in your photo is pretty (very dark...are you okay with it showing every footprint, smudge, and dust bunny? If so, that's fine). From all of your options there I would do white cabinets with the Himalaya White granite. But you said ignore the granite. :) I would go for the gray cabinets with white quartz everywhere in that case, but personally I'd worry about gray cabinets being very dated in a few years. Is there another quartz option that you could pair with the white cabinets that is light in color and maybe has some movement, like LG Bianco Drift?