Since the lot you describe is smaller than my open living area, I would suggest looking at some of the "shotgun" house plans around New Orleans,LA. I think you can build up and back and get an interesting home with a loft for space. It can be done, A porch with an entry to a narrow hall at the back might work best for you. Will you plan a courtyard (closed)? or what? What part of the country are you in? What are your local codes?

Interesting seeing designs from another country. Assuming the PUJA is located in the right location and the entrance to your home is the set of double doors adjacent to the car, I have the following comments/suggestions: 1. Regarding the bathroom on the bottom of the picture: a. It appears you have a walkway taking you from the large double doors(gate?) to the bathroom window. Is this correct and is this what you want? b. The room is sufficiently wide to add a bathtub or a shower. Switch the locations of the sink and the toilet, have the toilet turned to face into the room. This would provide easier use. You might also want to consider using a pocket door, will make the room feel more spacious. 2. Regarding the bedroom on the bootom of the picture: In the US we have built in closets but I kow other cultures use stand alone wardrobes. Not knowing what is custom in your country or what your preferences are, I would suggest moving the door over a couple feet and providing a building in closet the full length of the wall. This would allow you to completely customize the room's storage capacility - will it be filled with shoes and clothing or will is have boxes of files, luggage, etc. 3. The drawing room: a. If outsiders are not to use your family space, the orientation of the room will force people to see/walkthru your family lounge. b. If possible, can you shift or resize the drawing room such that it align better with the family lounge? If it can be shifted downward a few feet, you could angle the entry into the kitchen and the view from the family lounge would look better. c. As an alternative, could you reverse the stairs such that the main family lounge area shifts upward? recognize you will likely need to move the bedroom doors and possible reverse the bedroom and bathroom on the lower part of the picture to make sure the doors would work. 4. Kitchen: By US standards this is an average to smaller kitchen. we certainly have smaller ones in condos, apartments, and small homes. That said, I do believe in maximizing capacity and capability. The kitchen traditionally gets a lot of use by the family and has to be able to meet a multitude of needs. I am assuming the plan for the frig is to be located immediately next to the sink - where the empty space is. here are some thoughts: a. Do you need a door for the kitchen? If not, remove, if yes then make it a pocket door. b. Center the window to the OPEN area over the cabinets and align the sink in the center of the window. this will help with symetry. When in the kitchen, typically people spend a lot of time there - prepping, washing, drying, etc. It would give a nicer view than a blank wall or upper cabinets. c. Center the stove - this again helps with symmetry whioch in turn helps with aesthetics. d. Do you have sufficient storage in the house - think of everything that you have and the food products, kitchen items you will need to store. Again, culture differences mandate different needs. In the US we tend to do a bit of bulk shopping and generally have more "stuff" than we need so it is hard to determine what the right level is for you. Make a list of ALL the items you have for the place and assign a space to them on the plan. This is the best time (and least costly) to make changes to construction. 5. Regarding the bedroom on the upper wall - is there a reason the windows are different sizes, why not stick to the same size? 6. Storage room: Is there a way to relocate the "Low Height" restriction at teh entrance? Not sure is this simply means you aren't going to loose a couple inches or if this means a few feet. Big diffeence on how usable that space is. I hope some of these comment are useful. Best of luck with your project!

I agree that there is too much going on, however some of the suggestions are costly and in my opinion don't completely take care of the problems. I like the design approach it is fresh and updated. I agree that the chimney cap is out of proportion and just needs a simple band at the top. In order to make the exterior remain timeless over the years, Now Sit Down for a minute, I would make all of the exterior the white color. I know you love red however this will tie the different components of the architecture together more than any thing else. You can still have high gloss red doors and red tile pavers on the ground. It would also be very classy the use white tile in place of the brick look. You could even mix gloss white tiles with matt finish tiles to give an interesting sparkle when you ride by. I like the wrought iron upper railing, but the vertical blocking on the right side looks too heavy. So I would continue the same railing around the corner and back toward the house until it connects to the other balcony railing. This also ties the house together. It would look much more classic to not have a grid in the tall window and instead have a solid piece of glass down to the transom and then from there down be solid glass as well. Glass block in the courtyard column sections with back lights would look unbelievable. I would arch the closed in section on the second level as it would show up more there than the window being arched does, so save the money and don't arch that window. I would either hang a long contemporary light on the right elevation to dress it up or insert a long strip of glass block lighted from the interior to achieve the same effect. I charge for renderings, because I list the materials as well. Best, Leo Dowell Interiors.com

First of all the images you posted you cant make anything out what you got there. Secondly you should contact a local Architect when doing something like this, not only for structural reasons, but window design as well. He will layout window detail based on the window sizes available from a certain manufacturer or you can take his drawings which indicate opening detail to a place who sells windows, and they have catalogs of window combinations and sizes to make it work with what you have.