So for this to work, you need to go back through my question and make sure you have answered all of them the best you can. Is the electrical outlet for the counter space going to be right next to the switch, or is it that blurred spot that I see in the picture, . If your walls are Travertine marble, and there are not already electrical boxes in the exact location the lights go, we are going to have a hard time. If a 30" vanity goes in the corner, and you leave 5" on each side for the lights, that leaves a 20" mirror with one light jammed tight into the corner. So if we leave another inch on both sides, for clearance, that leaves 18" mirror. If you put a 3" frame around the mirror mirror, that only allows for 12" of actual mirror. I don't think that is enough mirror. Your bath is too narrow for a mirrored cabinet with built in lights unless it is recessed into th wall. The plumbing is probably in the way for that. Give me your thoughts on what I have just said, and then go back and answer all my questions. Then we can take it from there with a narrower down and focused search.

Hi Vandyz. I will try again but here is a picture of one of our Venetian Mirrors for your enjoyment. We have many more available so please contact me at salesandsupport@italiandecor-glasslights.com The option pictured is called a Girandole where it combine a Venetian MIrror with Lighting Dean

Underfloor Fan Coil Units Description: FH-UFC series ground type fan coil is a kind of terminal unit specially designed for air and water treatment in raised floor system. It has advantages as compact structure, short finish height, low noise, superior performance and most importantly, it is more convenient to install and maintain. This series of fan coil is widely used in air conditioning places with multiple rooms in industrial and residential buildings, such as hotels, restaurants, factories, hospitals, markets, exhibition halls and office buildings etc. Finally meet the demands for cooling, drying and heating etc. Structure: FH-UFC series of ground type fan coil sets adopt double or tetradic control coil, which cool or heat the indoor air and get the air back into indoor. The terminal unit is composed of the shell, impeller, multi-speed motor, coiler (heat transfer) and integral aluminium grille etc. Unit Component: The water inlet and outlet are at the two front sides of the unit. Connection hole is at right and the connection terminal is at the right of fans. Features: - Upper air transfer structure, easy to install. - Integral loading aluminium grill, finished by oxidation treatment, nice in appearance and good at wear-resisting and load-bearing. - Efficient in heat transfer, the heat exchanger is composed with cooper pipe and efficient aluminium fin in one. - The motor uses non-maintenance bearing, with new type radial impeller and it makes little noise. - Condensate water tray can be chosen when wet coiler progresses. - Double or tetradic control coil can be exchanged easily. In cooling or heating places, both are ok.

4 BHK- Dombivli Dining Area Design your space with us... 3D view-Vray-rendered Description: Table top finished in Acrylic soild surface Bottom framing done in S.S. and finished in Rose Gold paint. Chairs top finished in upholstery bottom framing done in S.S. and finished in Rose Gold paint.