HI -- Well this is a nice floor plan but it creates problems . Because the space is all open doesn't mean you have to put the living room or the dining room where indicated on the plan . Also where you have marked for the sofa is not going to work there . Not enough room and in the way of getting to the bathroom etc, I do think you may have to have a free floating TV stand between the living -dining rooms . You could have the TV on the wall beside the kitchen and have the sofa facing or on the left wall and the dining at the front . I would put the TV on the left wall near the entrance and have the sofa facing it , leaving a hallway walking space behind the sofa . It's too bad the front entrance is on the left . If it had been on the right then that would be better flow into the center of the main floor . If you do decide to have the TV room divider where you show on the plan , keep it right over to the left wall as a room divider , then it won't cut the room in half so much and it keeps the stairwell open . Remember , you do not need to push the furniture against the walls .

No chipped stone what would be the purpose of that ? Get a nice T.V stand depending on your style ( we have no clue ) then mount the TV at proper viewing height which is the center of the screen at eyellevel when you are seated . I love the Besta system from Ikea but it is very contemporary so when deciding on stand make sur eit is low to allow proper TV placement

You can orient your living room seating, and create a partition which does not go all the way to the ceiling: this enabling a visual barrier, space for tv unit and other display pieces and still have the openness and have large space still intact. Contact for further dialogue. And all the best!

Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad